A753 addWAVE GPRS is a newly designed RTU, which incorporates all the experiences that we gathered with its predecessor.
Thanks to its enormous flexibility this RTU can be deployed in a wide variety of applications, from agriculture to hydrographics to professional meteorology, from water quality to flood warning, from AMR (Automatic Meter Reading) to leak detection, from the monitoring of solar power to wind energy.
|Max. number of SDI-12 sensors
|Sensor excitation voltage
||stabilized or battery voltage
||synchronous or asynchronous
|Max. counter frequency
||2 x 30 Hz
2 x 500 Hz
|Integrated wind gust monitor
|Rain intensity monitoring
|Integrated mV amplifier
For which applications is A753 particularly well suited? Here are a few examples:
It's easy to install and easy to maintain, yet very robust with low maintenance requirements. Compatible with all Adcon sensors it offers a lot of expansion options and is ideally suited to monitor diseases, evapotranspiration, soil moisture and temperature and other parameters.
Professional Weather Stations
The professional meteorologist expects his equipment to provide high resolution, wide temperature ranges, WMO compliant measurement methods, particularly for wind gust monitoring, lots of expansion options, lots of memory, flexible sampling intervalls, and more - all this and more are part of A753's feature set, its compact design and low price notwithstanding.
Environmental monitoring of water and air quality
Thanks to the SDI-12 sensor standard a large number of multi-parameter probes has surfaced on the market, especially such for monitoring up to 16 water quality parameters simultaneously. A753 supports up to 40 SDI-12 sensor values, and 12 additional analog channels for 0-1/2,5V output signals with 16-Bit resolution across the RTUs full operating temperature range.
Flood warning and rain intensity monitoring
Many countries require data loggers to store the date and time of each pulse of a rain gauge in order to accurately calculate rain intensity. A753 can do even more, and additionally store up to three analog values, read at the same time as the pulse, e.g. wind speed and direction.
Detecting pressure hammers in water distribution pipelines
Using the measuring method originally developed for wind gust monitoring it is now also very easy to detect pressure hammers, which can cause a lot of damage to pippelines. Reading pressure 4 times per second and calculating a 3-second average, the highest of which is stored and transmitted, it becomes easy to accurately spot when and where such a pressure hammer has occurred.
- Monitoring equipment with high frequency
- Access control
- Frost warning
- Leak detection
- Level metering in ground and surface water bodies
- Soil moisture monitoring
- and much much more
||Aluminum, powder coated
|Dimensions / weight
||160 x 60 x 80 mm / 1.200 gr.
|Connectors for sensors and power
4 x M9 female 7-pin to sensor
1 x M9 female 5-pin to power
Made in Germany by Binder
IP-67 protection class
Sockets: brass, nickel plated, with gold plated socket contacts
||TNC with external seal, water tight , Made in Germany
||Mast mounting bracket, integrated
||-20°C ... +65°C / -4°F ... 149°F
extended temp. range from -30°C ... +75°C / -22°F ... 167°F upon request
||12x0...1V/2.5VDC (3 channels on Port C can be programmed to a measuring range of 0 - 150mV DC low temp. drift with internal amplification)
||40 x SDI-12 Values
||Total of 4 inputs:
2 for standard reed switches, debounced, e.g for rain gauges; max. 30 pulses per second. Min. pulse length 17ms, min. break time 17ms
2 for fast puls generators, e.g. wind speed sensors or flow meters; max. 500 pulses per second. Min. pulse length 1ms, min. break time 1 ms.
|TTL In- / Outputs
||4 x TTL compatible status inputs or switching outputs, programmable; of which 1 x 5V (Port A) and 3 x 3.3V (all others)
|Sensor excitation voltage
- Unregulated battery voltage from 5.5V ... 7.5V
- Stabilized voltage, programmable from
3.3V ... 5.5V in 0,1V increments
||2MB for up to 500.000 values, depending on types of sensors attached (SDI-12 typically needs more memory than analog). Example: 15-minute data of an ETo station can be stored for 6 months.
Special Logger functionality
|Wind gust monitoring
||Port C + Adcon wind sensor: 4 samples per second, 4 times per second calculation of 3-second average; Date and time of gust stored
|Wind vector monitoring
||Port C + Adcon wind sensor: wind direction is measured simultaneously with speed, weighed depending on speed, and stored as a vector
Rain intensity monitoring
|Port D + rain gauge with pulse output (max. resolution: 1 second). Date and time of ech pulse are stored; in addition up to 3 analog signals and 2 counter inputs can be stored, e.g. wind speed and air temperature
|Pressure hammer detection
||Port C + Adcon manometer sensor: manometer is permanently excited, sampled 4 x per second, and a 3-second average is stored
|Low Voltage amplifier
||Port B: sensors with an analog output of 0-150mV can be connected directly; internal amplifier
||To prevent sensors from influencing each others readings when read simultaneously ports can be sampled sequentially
||To rapidly detect status changes on a digital input it can be sampled up to once per second; date and time of each status change are put in memory; attention: with frequent status changes this can generate a lot of data! Applications: error detection on equipment, access control, pump monitoring, etc.
||900 & 1800 MHz (Europe) and
850 & 1900 MHz (Americas)
Optional: Telit H24 UMTS 7-Band
||small form factor
||SIM-cards can be PIN-code protected
- GSM: CSD Circuit Switched Data
- UMTS: requires upgrade to 7-band UMTS module (optional)
|GPRS connection settings
- permanent connection
- scheduled connection, from 1 x per minute to
1 x per day
||Omni directional, vertical, TNC jack, +2dBi
||internal 6.2V battery, charged by solar panel or mains power supply
||Panasonic Hi-temperature cell, industry grade, NiMH, 3300mAh
||FCC, R&TTE, CE, Industry Canada, ACMA Australia
||A753 addWAVE GPRS RTU
||A753 addWAVE UMTS RTU
||Solar panel 9V 540mA 5W
||Power supply 220VAC, with 5m cable
||Y-cable 5-pin, to connect 2 solar panels