Our products
The following pages shows our Smart Wireless Telemetry products and sensor portfolio for meteorological, hydrographical and agro-meteorological purposes.
100 - 240V Power Supply for A72x, A73x, A75x
Versatile, reliable power supply for 100-240V AC, various connectors available
10m Aluminum Pole Set
Light-weight telescopic aluminum pole for professional weather stations
115V AC US Power Supply for A72x, A73x, A75x
Versatile, reliable power supply for 115V AC with US Type A connector
230V AC UK Power Supply for A72x, A73x, A75x
Versatile, reliable power supply for 230V AC with UK Type G connector
240V AC Australian Power Supply for A72x, A73x, A75x
Versatile, reliable power supply for 240V AC with Australian Type I connector
5pin-5pin Extension Cord 10m
To mount solar panel or mains adapter in a distance from the RTU
7pin cable 3m for ADCON SEN-R
3m connection cable for ADCON TR1 / RTU
7pin-7pin Extension Cords: 2m, 4m, 8m
A variety of extension cords for ADCON RTUs and sensors
A440 Wireless Modem
A440 Wireless Modem
Wireless Modem connected to an ADCON Telemetry Gateway.
- Wireless modem
- IP-67; 20km range and even beyond depending on installation
- Radio communication (430-470MHz), 500mW
A502 Signal converter 4-20mA -> 0-2.5V
Most ADCON RTU's require voltage input signals. Most industrial installations supply mA-signals. Therefore: A502!
A503 I/O-Tester for A723, A733, A753
The A503 provides fast and accurate diagnostics for all ports of your RTU - in the field and in the lab.
A511 7-pin to 5-pin adapter cable
Connect your ADCON SDI-12 sensors to your A511 Sensor Testbox!
A511 Sensor Testbox
The tool of choice for your daily maintenance work: tests all your sensors and solar panels.
A514 Modbus Interface
Allows connection of Modbus devices
A553 Digital Port Extender
Each A553 adds 14 digital I/Os to a Series 4 RTU (A753, A723)
A723 addIT Series 4
A723 addIT Series 4 radio modem
A compact 10mW RTU with integrated SDI-12 capability, lots of I/O ports, lots of memory, and more at a very attractive price.
- IP-67; Ultra low power design; Cost effective solution if a number of sites are close to each other; 1km radio range
- Radio communication (432-470MHz), 10mW
- 6 analog 0 … 1/2,5VDC (3 channels also support 0 … 150mV); 2 pulse counter (2x 30Hz counters); 2 digital I/O (expandable with A553 up to 14 digital I/O's), 40 SDI-12 values
A724 addSWITCH
A724 addSWITCH Series 4 Valve Controller
Turns latching solenoids on and off, reads meters, monitors pressure!
- Remote Transmission Unit
- IP-67; Ultra low power design; Wireless remote irrigation control for up to four latching solenoids; 1km radio range
- Radio communication (432-470MHz), 10mW
- 1 analog 0 … 1/2,5VDC; 4 pulse counter (4x 30Hz counters); 4 latching solenoids (voltage programmable 5,5 … 15VDC)
A751 addRELAY UHF Repeater Station - discontinued
A751 addRELAY UHF Repeater Station
A751 extends the operating radius of other Adcon RTUs and economically optimizes radio quality. It is the successor to the successful A731 addRELAY.
- Remote Transmission Unit
- IP-67; Ultra low power design; Cost effective solution to extend range of other short or lange range UHF radio loggers by 20km and more depending on installation; Same major components as other data loggers
- Radio communication (430-470MHz), 500mW
A753 addWAVE UHF
A753 addWAVE UHF
The A753 addWAVE is the workhorse in ADCON's range of UHF RTU's, with a wealth of features and an unbeatable expansion capability.
- Compact data logger with integrated UHF modem
- IP-67 ultra-low-power design, WMO compliant measurement methods, high analog resolution, large integrated memory (2MB = ~6 months of data for 15-minute-readings), 5-20km transmission range, repeater functionality
- UHF radio (430-470MHz) with 500mW
- 12 x analog 0…1/2,5VDC (3 channels also support 0…150mV); 4 pulse counters (2x 500Hz fast counters / 2x 50Hz counters); 4 digital I/O's (expandable with A553 to up to 52 digital I/O's); 40 SDI-12 values; Modbus via adapter
A850 Base Station 5
with A440 + 30m CAN cable
Complete base station to manage UHF, GSM, GPRS, UMTS stations
- Telemetry Gateway
- Embedded Linux operating system; Java web application with graphical user interface; Backup battery to survive up to 20 hours of power outage; 1GB memory which allows to store data of 200 RTU's for approx. 4 weeks; Manages a network of up to 1000 RTU's; Co
- Fully integrable into ethernet network
- 2x USB; 1x 100MBit Ethernet; 1x RS-232; 1x RS-485 (to A440 Wireless Modem)
A850 – 2020 Telemetry Gateway
The Core
The core of your monitoring network - the A850 Telemetry Gateway. Manages large networks of UHF, GSM and GPRS RTUs automatically.
- Base Station for Adcon Wireless Sensor Networks
- Manages up to 1000 Adcon RTUs, easy to operate via graphical user interface, integrated uninterruptible power supply (max. 5h), New 16 GB data memory on SD Card, where 1 GB data memory is sufficient for 200 stations for 4 weeks, embedded Linux OS.
- Connects seamlessly into Ethernet networks
- 1x USB; 1x 100MBit Ethernet; 1x RS-232; 1x RS-485 (to A440 Wireless Modem)
A902 1/2/3 Adaptor Cable
7-pin 1/2/3 Adaptor to connect multiple analog sensors to one RTU port
A908 Step-Up Converter
Step-Up Converter for sensor excitation: enhances RTU's battery voltage by a factor of 1.5
A910 Solar Panel Tester
All ADCON solar panels of A723, A733 and A75x RTU's can be tested quickly and reliably.
A922 Power Adapter
Power adapter for industrial applications with 12V or 24VDC supply
ACS110 Charger for ADCON Battery Packs
The ADCON ACS-110 Charger is the ideal device to charge all ADCON NiMH and NiCd batteries with capacities of up to 7000 mAh.
Adapter for Professional Rain Gauge
To mount the ADCON Professional Rain Gauge onto a 40mm pole.
Adapter G1/4" in > 18 NPT out
To install G1/4" threaded manometers in 18 NPT threaded pressure collets.
Adapter G1/4" in > G1/2" out
To install G1/4" threaded manometers in G1/2" threaded pressure collets.
ADCON addVANTAGE 6.x
ADCON addVANTAGE 6.x
What it is? A flexible platform to visualize, process and distribute data - for literally millions of users!
Adcon BP1 Barometric Pressure Sensor
500 - 1500mbar, 0.1-2.5V
Extremely accurate - yet extremely affordable. Swiss made precision in a wind gust proof case.
ADCON SERIES 6 RTU
ADCON new ultra low power RTU A760, A765 and A764
The ADCON SERIES 6 RTU is the new generation of remote-controlled, ultra low-power dataloggers for agricultural, meteorological and hydrological applications at a competitive price.
- Compact data logger with integrated cell modem
- ultra-low-power design; large integrated memory; IP-67/IP-65; WMO-compliant weather recording; Bluetooth; Firmware update over the air feature (FOTA )
- 2G/3G or 4G/LTE
- A764: 12x analog in (0 … 2,5 VDC); 4x pulse counter 4x digital in/out (0 … 3 V TTL); 40x SDI-12 values; Analog resolution: 16-Bit @ 0 … 2,5 V
Adcon TR1 Air Temperature & rel Humidity Sensor
Spare sensor for Adcon's Combi sensor model "Standard"
ADCON TR1 - highly accurate, versatile temperature and humidity sensor for an attractive price
All-in-One Handheld Device XA1000 - discontinued
The most precise and flexible all-rounder instrument for professional applications-easy to handle and robust for measurement of Temperature/Humidity, flow, co2 and air pressure
The most precise and flexible all-rounder handheld instrument for professional applications detecting temperature, rel. humidity, air pressure, air flow and co2 - easy to handle and robust!
- Integrated sensor for air pressure, exchangable sensors for highly precise measurements of temperature, relative humidity and air flow
- Various - thus exchangable sensors
- Precice and flexible all-rounder handheld instrument, easy to handle and robust, sensor connection with automatic recognition, saves measuring campaignes, allows all climate data to be calculated and archieved, evaluation software SmartGraph3 included
- USB (Cable and SmartGraph3 software included)
Allround SDI Temperature/Humidity sensor - discontinued
Compact temperature-/humidity sensor, in plastic tube. Application in HVAC field, reference measurement in accordance with ISO9000 Quality Assurance.
Antenna 430-470 MHz TNC f. A440, A733
The standard antenna for all Adcon UHF RTUs with 500mW output power
Antenna 432-470 MHz for A723 Series 3/4, A724
Flexible antenna for addIT A723 Series 3/4 and A724
Antenna GSM Quad Band TNC, IP-66, rigid
Highly efficient rigid quad band antenna, tailor made for ADCON RTUs.
Antenna GSM Quadband incl. mounting bracket and 5m cable
Whenever you need to mount the antenna a few meters away from your GPRS RTU
Antenna TNC 430-470 MHz inc. mounting bracket and 6m cable
Mounting kit for UHF antenna with TNC connector, incl. cable and all accessories.
Battery Pack NiMH 4500mAh for A850
Industry-grade NiMH battery, for environmental applications
Cables for ADCON PA1 Manometer Probes: 5m, 10m
Cables for the Adcon PA-1 manometer sensor
CAN-Cable 4pin to connect A440 to A840 / A850
Connects A840/A850 Telemetry Gateway to A440 Wireless Modem.
CO2 sensor - discontinued
A multiple point CO2 and temperature adjustment procedure leads to excellent CO2 measurement accuracy over the entire temperature working range, ideal for use in agriculture or outdoors for instance.
The CO2 sensor is designed for use in harsh, demanding OEM applications. A multiple point CO2 and temperature adjustment procedure leads to excellent CO2 measurement accuracy over the entire temperature working range, ideal for use in agriculture or outdoors for instance.
Connection cable (for Snow depth sensors) - discontinued
Connection cable for Snow depth sensor SHM30
Directional GSM 900/1800/1900 TNC, IP66, Mast mount
To improve transmission and reception in areas with bad GSM signal
Directional GSM Antenna TriBand TNC, IP66, Mast mount
Provides extra signal strength for difficult locations
EnviroPro Precision Soil Probes
Soil moisture and temperature
Fully encapsulated soil sensors for meaningful crop selection,irrigation and fertilisation decision making. Measurement of soil moisture plus temperature monitoring.
Fixture-Kit for guy wires: set of three lugs incl. nuts and bolts
Fixture Kit for guy wires
Foldable base, galvanized steel, for 10m pole set
Extremely sturdy foldable base to take down 10m mast
Guy wire set for 350cm pole set
Complete guy wire set to secure a standard weather station
Hand-held measuring device XC250 (with pyrometer) - discontinued
High-precision reference measurement standard for industrial temperature calibrations
Excellent accuracy of temperature and relative humidity. Display of calculations and statistical functions. Calibration function and offset correction. Including a calibration certificate. USB interface with SmartGraph3 software.
- Relative humidity, Temperature, Surface temperature
- Temperature / NTC (Negative Temperature Coefficient); Rel. humidity / Capacitive; Surface Temp. / Pyrometer (thermopile)
- Excellent accuracy of temperature and relative humidity. Display of calculations and statistical functions.
- USB (Cable and SmartGraph3 software included)
Handheld measuring device XC200 - discontinued
High-precision reference measurement standard for industrial temperature calibrations
Excellent accuracy of temperature and relative humidity. Display of calculations and statistical functions. Calibration function and offset correction. Including a calibration certificate. USB interface with SmartGraph3 software.
- Relative humidity, Temperature
- Temperature / NTC (Negative Temperature Coefficient); Rel. humidity / Capacitive
- Excellent accuracy of temperature and relative humidity. Display of calculations and statistical functions.
- USB (Cable and SmartGraph3 software included)
Handheld measuring device XP100 - discontinued
High-precision handheld device for PT100 temperature sensors.
Very exact temperature measuring device (+/-0.01°C). Ideal as a reference device and for comparison measurements in service or as part of ISO9000 tasks. We recommend a DAkkS calibration certificate for traceability to international standards.
- Temperature / PT100 sensor
- Various - thus exchangable sensors
- Precise and flexible all-rounder handheld instrument, easy to handle and robust, sensor connection with automatic recognition, saves measuring campaignes, allows all climate data to be calculated and archieved, evaluation software SmartGraph3 included
- USB (Cable and SmartGraph3 software included)
Handheld Measuring Device XP101 for reference temperature - discontinued
High-precision reference measurement standard for industrial temperature calibrations
The most accurate handheld device (0.005°C) for temperature is an ideal temperature reference in block calibrators, climate chambers or liquid baths.
- Temperature
- PT100 - 4 wire sensing / temperature
- 0.005°C accuracy, high quality wooden case, PT100 ceramic sensor, 2m cable, batteries and DAkks calibration certificate are included in delivery
- USB (Cable and SmartGraph3 software included)
Handheld measuring device XP200 - discontinued
X-pert range for humidity and temperature measurements in climate and environmental technology.
Measuring device with integrated pressure sensor is compatible with various intelligent temperature and humidity sensors.
- Air pressure, temperature and humidity
- Various - thus exchangable sensors
- Precice and flexible all-rounder handheld instrument, easy to handle and robust, sensor connection with automatic recognition, saves measuring campaignes, allows all climate data to be calculated and archieved, evaluation software SmartGraph3 included
- USB (Cable and SmartGraph3 software included)
Handheld measuring device XP201 for reference humidity - discontinued
High-precision reference measurement standard for industrial humidity calibrations
The most accurate handheld device (0.8%) for relative humidity. Ideal as reference standard. Excellent stability, very good repeatable measurements, absolute hysteresis latitude as well as no drift of the measurement value at very high humidity levels. For traceability to national standards a DAkkS calibration certificate is attached.
- Relative humidity, temperature and air pressure
- resistive-electrolytic / Humidity
- High-precision measurement of temperature and relative humidity (0.8 % accuracy), display of calculations and statistical functions, high-quality case, resistive-electrolytic humidity sensor, 2m cable, batteries and DAkks calibration certificate included in delivery
- USB (Cable and SmartGraph3 software included)
Handheld measuring device XP400 - discontinued
Ideal for volume measurements, air intake and air discharge measurements in climate measuring technology. Data memory and software.
The X-pert for precise airflow measurements on various measurement ranges.
- The X-pert for precise airflow measurements on various measurement ranges.
- Various - thus exchangable sensors
- Precice and flexible all-rounder handheld instrument, easy to handle and robust, sensor connection with automatic recognition, saves measuring campaignes, allows all climate data to be calculated and archieved, evaluation software SmartGraph3 included
- USB (Cable and SmartGraph3 software included)
Heavy duty cross bar clamp, aluminum, for 40mm pole set
Heavy duty cross bar clamp, aluminum
Heavy duty dual cross bar clamp, aluminum, for 40mm pole set
Heavy duty dual cross bar clamp, aluminum
LED-Tool for ADCON RTU’s
LED Tool to check your RTUs connection and battery status
Lightning rod for Wind sensor cross arm
Lightning rod for mounting bracket of Pro 10 Sensor set
Lufft I-Box power supply for DIN rail mount - discontinued
Lufft I-Box power supply for DIN rail mount
Lufft I-BOX Serial - Discontinued
The Lufft I-BOX Serial is the door opener for almost every interface – thanks to app-technology!
With the Lufft I-Box Serial, weather sensors such as the WSxxx product family can easily be integrated into existing systems. IMPORTANT: The Lufft I-BOX is discontinued
- Data processing device - no measurements available without connected sensors
- Data processing device - no measurement technology available
- Easy commissioning (Plug & Play), Configuration and remote maintenance via browser interface, Applications upgradeable as required, Increased interference immunity for the industrial environment, Transmission of measured values to the corporate network
- LAN, Serial combi - interface with RS232/422/485
MCPS8 Monitoring Software - discontinued
A specialist in its field: MCPS8 is compliant with 21 CFR Part 11
A specialist in the field of monitoring software: MCPS8, compliant with 21 CFR Part 11
- Development of networks compliant with 21 CFR Part 11; more functions than SmartGraph3 software (see comparison SmartGraph3 vs. MCPS8 - available in the download area)
OPUS 20 TCO - discontinued
Inroom Data Logger for measurement of temperature, relative humidity and CO2 (Indoor Air Quality), made in Germany!
Inroom Data Logger for measurement of temperature, relative humidity and CO2 (Indoor Air Quality), made in Germany!
- Temperature, Relative humidity, CO2
- Temperature / NTC, Humidity / Capacitive, CO2 / NDIR
- LAN datalogger with built-in sensors and the highest precision! Firmware online updatable
- USB (Cable and Monitoring Software SmartGraph3 included)
OPUS 20 THI - discontinued
For climate monitoring in buildings and the control of all climate-sensitive production processes
For climate monitoring in buildings and the control of all climate-sensitive production processes: in electronic data-processing centres, control cabinets, wind turbines, storage rooms and museums.
- Temperature & Relative humidity
- Temperature / NTC, Humidity / Capacitive
- LAN datalogger with built-in sensors and highest precision, evaluation software SmartGraph3 included
- USB (Cable and SmartGraph3 monitoring software included)
OPUS 20 THIP - discontinued
Lufft OPUS20 - An essential data collector for all calibration laboratories measuring precise temperature, relative humidity and air pressure!
Lufft OPUS20 - An essential data collector for all calibration laboratories measuring precise temperature, relative humidity and air pressure!
- Temperature, relative humidity and air pressure
- Temperature & air pressure / NTC, Humidity / Capacitive
- LAN datalogger with built-in sensors and highest precision, evaluation software SmartGraph3 included
- USB (Cable and SmartGraph3 monitoring software included)
OPUS 20E for external Sensors - discontinued
The OPUS20E offers the highest flexibility and is excellent value for money. It allows the connection of up to 4 external temperature and relative humidity sensors, as well as 2 further analogue sensors. Intelligent BUS sensors can be integrated...
The OPUS20E offers the highest flexibility and is excellent value for money. It allows the connection of up to 4 external temperature and relative humidity sensors, as well as 2 further analogue sensors. Intelligent BUS sensors can be integrated via the OP.
- Measurement of Input voltage 0-1V, Current measurement - 2-wires, Current measurement - 3-wires, Thermocouple K, Thermocouple J, Thermocouple S, PT100
- Input voltage 0-1V, Current measurement - 2-wires, Current measurement - 3-wires, Thermocouple K, Thermocouple J, Thermocouple S, PT100
- LAN datalogger with built-in sensors and the highest precision and with up to 10 external channels/sensors per Opus20E.
- USB (Cable and Monitoring Software SmartGraph3 included)
OTT WAD 200/314 - Weighing Rain Gauge - discontinued
Weighing rain gauge with automatic drain
The OTT WAD 200/314, a weighing technology combined with a self-emptying weighing rain sensor, was developed in addition to the OTT Pluvio² series and is specially designed for the use in subtropical and tropical climates.
- Precipitation intensity and amount in real-time from 0.001 to 720 mm/h
- 1
- Continuous and consistent rain monitoring technology with cumulative data output according WMO guide line No 8
- SDI-12 / RS-485, pulse, analog output
PA-2 Manometer Sensor
Pressure Sensor for Pipelines
Monitoring pressure in water distribution networks and irrigation mainlines
Plastic case - discontinued
Plastic case for OPUS and UMB sensors
Plug-in power supply (Lufft I-BOX) - discontinued
Plug-in Power supply (Lufft I-BOX)
Pole Anchor: 76x800mm, galvanized steel, 4 adjustment screws
Screw that! You wont find any more adequate screw than this one!
Pole Pounder
Protects the top end of your poles
Precipitation Sensor R2S-UMB - discontinued
The radar precipitation sensor Lufft R2S-UMB allows fast measurement of precipitation intensity and distinguishs between precipitation type (Rain, snow, sleet, freezing rain, hail). The operation is maintenance-free, thanks to radar measurement technology
The radar precipitation sensor Lufft R2S-UMB allows fast measurement of precipitation intensity and distinguishs between precipitation type (Rain, snow, sleet, freezing rain, hail). The operation is maintenance-free, thanks to radar measurement technology.
- Rain/precipitation quantity, rain/precipitation type (Rain, snow, sleet, freezing rain, hail)
- 24GHz Doppler radar
- Very fast response time, maintenance-free measurement, present weather detection
- RS-485, various RS-485-protocols
Pressure sensor - discontinued
Pressure sensor
Protection Cap for male Binder connectors
Keeps male Binder Connectors clear of dirt and moisture
Protective cap with grid filter for hand held devices - discontinued
Protective cap for medium pollution levels
Protective cap for hand held measurement devices for medium pollution levels
PT100 plunge sensor out of stainless steel for food - discontinued
Food probe in stainless steel protective casing for precise temperature measurements (PT100 1/10 class B).
PT100 plunge sensor, long - discontinued
This high-precision immersion probe in stainless steel protective housing can also be used as a reference sensor for calibration and testing systems.
PT100 plunge sensor, short / long - discontinued
The immersion probe is suitable for measurements in gaseous media, liquids and granular material, such as sand.
PT100 surface sensor - discontinued
At the head of the surface temperature probe is a spring-loaded sensor which takes the temperature. Can be used on flat, matt and metallic surfaces.
RA440 - Remote A440
RA440 - Remote A440
For all those remote areas where you don't have GSM coverage, and where you can't put a Base Station near your UHF RTU's!
- Remote Wireless Modem
- IP-67; Build a remote UHF network, uplink to A850 via GPRS / 3G; 20km range on UHF and even beyond depending on installation
- Uplink to A850 via GPRS, 3G and Radio communication (430-470MHz), 500mW
Real Time Clock for A850
Guarantees automatic startup of A850 and continued operation after complete power failure.
Reinforced Poleset, 360cm w/o impact protection
Robust aluminum pole set for mounting of ADCON RTUs
RG Pro Rain Gauge
Professional Rain Gauge, 0.1 & 0.2mm, 200cm²
This range of Rain Gauges is unique: extremely robust, accurate, reliable, WMO approved - and yet very economical!
RG1 Rain Gauge, 200cm², 0.2mm
unheated
Brand new design, fully made of aluminum: accurate, robust, with a long service life
RG1 Rain Gauge, 400cm², 0.1mm
unheated Version
Rain Gauge fully made of aluminum: accurate, robust, with a long service life
Screw-in 4-pole connector for PT100 individual sensors - discontinued
Screw-in 4-pole connector for PT100 individual sensors
SDI Airflow-/Temperature Sensor (0.08…2m/s) - discontinued
Reference device for airflow and temperature measurements in service and maintenance. Proof of air tightness of buildings and rooms.
SDI Airflow-/Temperature Sensor (0.2…20m/s) - discontinued
For airflow and temperature measurements in climate technology environment.
SDI Temperature-/Humidity sensor with 5mm diameter - discontinued
Compact, slim temperature-/humidity sensor in stainless steel protective tube. With a diameter of just 5mm, the sensor is suitable for applications in measurement areas which are difficult to enter.
SDI-12 cable 7-pin M9 - open end: 5m, 10m
Custom-made cables to connect SDI-12 sensors to ADCON RTUs
SDI-12 Wiring Box Alu w/ 4x cable gland + WAGO clamp
Solid wiring box for proper conection of drop cables
Snow Depth Sensor SHM 30 - discontinued
Compact, reliable and cost-efficient - Accurate measurement of snow depth / snow height sensor SHM30 based on an opto-electronic distance sensor / laser rangefinder technology.
Compact, reliable and cost-efficient. The SHM30 snow depth sensor reliably determines snow depths up to 10 meter within seconds and with Millimeter precision, due to opto-electronic/laser based rangefinder technology.
- Snow depth
- opto-electronic measuring technique with eye-safe laser sensor
- Determination of snow depth over long distances, MTBF (meantime between failure) >40.000h, allows discrimination between snow and grass, very compact and weatherproof housing
- RS232, RS422, analogue output
Solar Set 260mA, 9VDC, 2.4W
Solar Panel 260mA for A72x RTUs
Solar Set 540mA, 9VDC, 5.1W
Solar Set 540mA for all Adcon RTUs
ST2 Temperature Sensor for Soil, Water and Snow
Soiltemperature
The Adcon Soil Temperature Sensor is a robust instrument, built for extreme simplicity in installation and operation.
Steel Sinter Cap for ADCON TR1
Extra rugged protection for TR1 sensor elements
Temperature & humidity probe - discontinued
Temperature & humidity probe
Temperature & Humidity sensor for reference measurements - discontinued
T/RH sensor with highest precision
TNC Antenna jack f/f
To mount external antennas on mounting brackets or protective cases
TR1 Combisensor Temperature / rel. Humidity
Combi Sensor "Standard"
Extremely accurate and robust combi-sensor for air temperature and relative humidity
TR2 Combisensor Temperature/rel.Humidity SDI-12
Combi Sensor "Professional"
Unsurpassed accuracy for highly professional applications!
USB Communication Cable for A723, A731, A733, A75x
A720 USC USB communication cable to program RTU
Wall mounting kit for A73x and A75x
Complete mounting kit for the aluminum case of the A73x and A75x
Water meter cable: 7pin male - open ends: 5, 10, 15, 20m
Cables in various lengths to connect water meters to an ADCON RTU
WET Leaf Wetness Sensor
Robust and low-maintenance Leaf Wetness sensor
Wind Direction Pro10
A professional wind direction only sensor at a very attractive price!
Wind Sensor Set Pro10/2
Wind Speed, Wind Direction, Cross Bar
This professional instrument was developed to meet WMO requirements. Robust, accurate and yet very affordable.
Wind Sensor Set Vento1
Wind Speed, Wind Direction, Cross Bar
This professional instrument was particularly developed to provide a very cost effective, yet WMO compliant wind sensor.
Wind Speed Pro10
A professional wind speed only sensor at a very attractive price!
WS10 Smart Weather Sensor - discontinued
All-in-one weather sensor with measurement of temperature, relative humidity, air pressure, wind velocity / direction, precipitation amount / intensity / type, UV index, sun direction, brightness and twilight and global radiation
New kind of multi-parameter weather sensor measuring temperature, humidity, pressure, wind, precipitation, UV index, sun direction, brightness and twilight and radiation.
- air temperature, relative humidity, air pressure, wind direction / velocity, precipitation amount / intensity / type, UV index, sun direction, brightness, twilight and radiation
- Capacitive, Doppler radar, silicon pyranometer, thermal
- Compact, multiparameter, economic, with dome heating, maintenance-free, open communication protocol, good price performance ratio
- RS485, 2-wire, half-duplex; supporting Modbus, UMB, UMB ASCII 2.0 protocol; WLAN for configuration
WS3000-UMB Reference Weather Sensor - discontinued
New class of Smart Weather Sensors with high-quality aluminum housing: WS3000 Climate Reference Sensor for Calibration / Verification of Air Temperature, Relative Humidity, Air Pressure
WS3000 climate reference sensor for calibration and verification of air temperature, relative humidity, air pressure. New class of WiFi enabled Smart Weather Sensors with high-quality aluminum housing.
- Temperature, relative humidity, air pressure (redundant pressure as option)
- PT100/Temp, Capacitive/RH, MEMS Resonant Pressure transducer
- high-quality full-metal construction with ventilated radiation shield for air temperature / humidity measurements, Traceable accuracy, Modular architecture, Drift-free sensing technologies, Easy maintenance and calibration possibilities
- RS485, 2-wire, half-duplex/WiFi
WS303-UMB Smart Weather Sensor - discontinued
Compact all-in-one weather sensor for measurement of temperature, relative humidity, radiation and air pressure.
Compact all-in-one weather sensor from the WS-Series. Measurement of temperature, relative humidity, radiation and air pressure.
- Temperature, relative humidity, radiation and air pressure
- NTC/T, Capacitive/RH, Tiltable Pyranometer Kipp&Zonen/Radiation, MEMS capacitive/Pressure
- Compact all-in-one weather sensor, low power, aspirated radiation shield, maintenance-free operation, open communication protocol
- RS485 with supported protocols UMB-Binary, UMB-ASCII, Modbus-RTU, Modbus-ASCII, XDR and SDI-12
WS304-UMB Smart Weather Sensor - discontinued
Compact all-in-one weather sensor for measurement of temperature, relative humidity, radiation and air pressure.
Compact all-in-one weather sensor from the WS-Series. Measurement of temperature, relative humidity, radiation and air pressure.
- Temperature, relative humidity, radiation and air pressure
- NTC/T, Capacitive/RH, Tiltable Pyranometer Lufft/Radiation, MEMS capacitive/Pressure
- Compact all-in-one weather sensor, low power, aspirated radiation shield, maintenance-free operation, open communication protocol
- RS485 with supported protocols UMB-Binary, UMB-ASCII, Modbus-RTU, Modbus-ASCII, XDR and SDI-12
WS3100-UMB Reference Weather Sensor - discontinued
New class of Smart Weather Sensors with high-quality aluminum housing: WS3100 Climate Reference Sensor for Calibration / Verification of Air Temperature, Relative Humidity, Air Pressure and Solar Radiation
WS3100 Climate Reference Sensor for Calibration / Verification of Air Temperature, Relative Humidity, Air Pressure and Solar Radiation. New class of WiFi-enabled, smart Weather Sensors with high-quality aluminum housing.
- Temperature, relative humidity, air pressure (redundant pressure as option), global radiation
- PT100/Temp, Capacitive/RH, MEMS Resonant Pressure transducer, Kipp&Zonen CMP10 / radiation
- Metal housing with ventilated radiation shield temperature/humidity measurements, Traceable accuracy, Modular architecture, Drift-free sensing technologies, Easy maintenance & calibration possibilities, CMP10 Secondary Standard Kipp & Zonen Pyranometer, WiFi module
- RS485, 2-wire, half-duplex/WiFi
WS503-UMB Smart Weather Sensor - discontinued
Compact all-in-one weather sensor from the WS-Series. Measurement of temperature, relative humidity, air pressure, wind direction, wind speed and radiation.
Compact all-in-one weather sensor from the WS-Series. Measurement of temperature, relative humidity, air pressure, wind direction, wind speed and radiation.
- Temperature, relative humidity, air pressure, wind direction, wind speed, radiation
- Ultrasonic/Wind, NTC/T, Capacitive/RH, MEMS capacitive/Pressure, Tiltable Pyranometer Kipp&Zonen/Radiation
- Wind detection with birdproof construction. Compact all-in-one weather sensor, tiltable pyranometer, low power, heater, aspirated radiation shield, maintenance-free operation, open communication protocol.
- RS485 with supported protocols UMB-Binary, UMB-ASCII, Modbus-RTU, Modbus-ASCII, XDR and SDI-12
WS504-UMB Smart Weather Sensor - discontinued
Compact all-in-one weather sensor with measurement of temperature, relative humidity, air pressure, wind direction, wind speed and radiation.
Compact all-in-one weather sensor from the WS-Series. Measurement of temperature, relative humidity, air pressure, wind direction, wind speed and radiation.
- Temperature, relative humidity, air pressure, wind direction, wind speed, radiation
- Ultrasonic/Wind, NTC/T, Capacitive/RH, MEMS capacitive/Pressure, Tiltable Pyranometer Lufft/Radiation
- Wind detection with birdproof construction. Compact all-in-one weather sensor, tiltable pyranometer, low power, heater, aspirated radiation shield, maintenance-free operation, open communication protocol.
- RS485 with supported protocols UMB-Binary, UMB-ASCII, Modbus-RTU, Modbus-ASCII, XDR and SDI-12
Y-Cable 5 pin
5-pin Y-cable, for dual solar panel solutions
Y-Cable 7-pin
7-pin Y-cable to connect 2 sensors to one I/O port