Adcon BP1 Barometric Pressure Sensor
500 - 1500mbar, 0.1-2.5V
High accurate Barometric Pressure Sensor. Temperature dependencies and non-linearities of the sensor
are mathematically compensated for, up to 80°C. The sensor has a very low power consumption and produces an analogue output signal of 0,1 ... 2,5VDC
Request a quote or advice
are mathematically compensated for, up to 80°C. The sensor has a very low power consumption and produces an analogue output signal of 0,1 ... 2,5VDC
The piezoresitive sensor element is fully temperature compensated and performs with accuracy better than 0,1%FS across the whole range. According to WMO requirements the sensor itself is encapsulated in a robust polycarbonate housing, which will protect the sensor element from erroneous readings caused by wind gusts. A high-capacity Goretex vent makes sure that pressure inside the case equals outside pressure, and that water ingress is prevented.
The sensor box is mounted to the pole of a weather station by means of a mounting bracket and clamp supplied with the product. A shielded 2m cable with a 7-pin Binder jack connects the probe to any RTU of the A723, A733 and A75x product families.
|
|
Download PDF
Download PDF
| Pressure range (FS) | 500 ... 1500mbar |
| Sensing element: | piezoresistive pressure element |
| Accuracy: | 0.1% FS |
| Operating temperature: | -40°C ... +100°C / -40°F ... +212°F |
| Compensated temperature range: | 0°C ... +80°C / 32°F ... +176°F |
| Supply Voltage: | 3.5V ... 12V DC |
| Output Signal: | 0.1V ... 2.5V |
| Material: | Case: Polycarbonate Sensor: Stainless Steel 316L (DIN 1.4435) |
| Dimensions LxWxH: | 150 x 80 x 75mm / 5.9 x 3.15 x 2.95 in. including mounting bracket, goretex vent and gland nut |
| Weight: | 330 grams (sensor only) / 0.73 lb. |
| Protection: | IP67 |
| Cable & Connector: | 7-pin Binder jack with 2m cable |