toggle menu

WS504-UMB Smart Weather Sensor - discontinued

Compact all-in-one weather sensor with measurement of temperature, relative humidity, air pressure, wind direction, wind speed and radiation.

DISCONTINUED
DISCONTINUED

From the WS product family of professional intelligent measurement transducers with digital interface for environmental applications. Integrated design with ventilated radiation protection for measuring: Air temperature, relative humidity, air pressure, wind direction, wind speed and radiation. One external temperature or rain sensor is connectable.

IMPORTANT: WS504 is discontinued

  • Temperature, relative humidity, air pressure, wind direction, wind speed, radiation
  • Ultrasonic/Wind, NTC/T, Capacitive/RH, MEMS capacitive/Pressure, Tiltable Pyranometer Lufft/Radiation
  • Wind detection with birdproof construction. Compact all-in-one weather sensor, tiltable pyranometer, low power, heater, aspirated radiation shield, maintenance-free operation, open communication protocol.
  • RS485 with supported protocols UMB-Binary, UMB-ASCII, Modbus-RTU, Modbus-ASCII, XDR and SDI-12

Advantages of the Smart Weather Sensor WS504

  • Measuring wind direction and speed insusceptibly to bird nesting thanks to roofed construction
  • All-in-one housing concept of a compact weather sensor combining 6 measurement parameters in one housing with only one cable connection
  • Tuiltable pyranometer unit
  • Built-in data pre-processing, universal interfaces and selectable output protocols
  • Compatible with many commercially available Met/HydroMet dataloggers and PLS systems thanks to an open communication protocol
  • Maintenance-free operation – no moving parts that can wear out
  • Suitable for all climate zones; also for solar-powered automatic meteorological stations
  • Ventilated temperature and humidity measurement according to WMO guidelines
  • Integrated heater that can be switched on if there is danger of frost

Examples of use of the Smart Weather Sensor WS504

The robust and maintenance-free smart weather sensor WS504 is designed for professional meteorological applications in all climate zones. It delivers reliable data, even in extreme ambient conditions.

Examples of use:

  • PV-Monitoring / Solar Monitoring on photovoltaic farms
  • Automatic weather station / Automatic weather sensor (AWS)
  • Hydro-meteorological stations
  • Meteorological reference stations
  • Integration into various other systems/solutions, where this measurement parameters are needed...
Download PDF
General
Dimensions Ø approx. 150 mm, Height approx. 377 mm
Weight Approx. 1.5 kg
Interface RS485, 2 - wire, half - duplex
Power supply 11…32 VDC
Power supply 5…11 VDC (electronics with limited precision of measurements)
Power supply 24 VDC +/- 10% (heater)
Power consumption 20 VA (heater)
Operating temperature -50...60 °C (with heater)
Operating rel. humidity 0...100 % RH
Cable length 10 m
Protection level housing IP66
Standards/Regulations Compliant to IEC 61724-1:2017 Class C
Mast mounting suitable for Mast diameter 60 - 76 mm
Radiation
Unit W/m²
Accuracy 5 %
Response time (95%) < 1 s
Non-stability(change/year) ±1 %
Non-linearity (0 to 1000 W/m²) ±1 %
Directional error (at 80° with 1000 W/m²) ±20 W/m²
Temperature dependence of sensitivity ±5 % (-10 to + 40 °C)
Tilt error (at 1000 W/m²) ±1 %
Spectral range 300...1100 nm
Measuring range 1400 W/m²
Temperature
Principle NTC
Measuring range -50 ... 60 °C
Unit °C
Accuracy ±0.2 °C (-20...50 °C), otherwise ±0.5 °C (>-30 °C)
Relative humidity
Principle Capacitive
Measuring range 0 ... 100 % RH
Unit % RH
Accuracy ±2 % RH
Air pressure
Principle MEMS capacitive
Measuring range 300 ... 1200 hPa
Unit hPa
Accuracy ±0.5 hPa (0...40 °C)
Wind direction
Principle Ultrasonic
Measuring range 0 ... 359.9 °
Unit °
Accuracy < 3 ° RMSE > 1.0 m/s
Resolution 0.1
Wind speed
Principle Ultrasonic
Measuring range 0 ... 75 m/s
Unit m/s
Accuracy ±0.3 m/s or ±3 % (0...35 m/s) ±5 % (>35 m/s) RMS
Resolution 0.1 m/s
Download PDF
Back