Accessories
Antenna TNC 430-470 MHz inc. mounting bracket and 6m cable
Mounting kit for UHF antenna with TNC connector, incl. cable and all accessories.
SDI-12 Wiring Box Alu w/ 4x cable gland + WAGO clamp
Solid wiring box for proper conection of drop cables
TNC Antenna jack f/f
To mount external antennas on mounting brackets or protective cases
Steel Sinter Cap for ADCON TR1
Extra rugged protection for TR1 sensor elements
Antenna 432-470 MHz for A723 Series 3/4, A724
Flexible antenna for addIT A723 Series 3/4 and A724
Wall mounting kit for A73x and A75x
Complete mounting kit for the aluminum case of the A73x and A75x
Antenna GSM Quad Band TNC, IP-66, rigid
Highly efficient rigid quad band antenna, tailor made for ADCON RTUs.
Directional GSM 900/1800/1900 TNC, IP66, Mast mount
To improve transmission and reception in areas with bad GSM signal
Real Time Clock for A850
Guarantees automatic startup of A850 and continued operation after complete power failure.
Antenna 430-470 MHz TNC f. A440, A733
The standard antenna for all Adcon UHF RTUs with 500mW output power
Lightning rod for Wind sensor cross arm
Lightning rod for mounting bracket of Pro 10 Sensor set
Directional GSM Antenna TriBand TNC, IP66, Mast mount
Provides extra signal strength for difficult locations
Fixture-Kit for guy wires: set of three lugs incl. nuts and bolts
Fixture Kit for guy wires
Guy wire set for 350cm pole set
Complete guy wire set to secure a standard weather station
Pole Anchor: 76x800mm, galvanized steel, 4 adjustment screws
Screw that! You wont find any more adequate screw than this one!
Pole Pounder
Protects the top end of your poles
Adapter for Professional Rain Gauge
To mount the ADCON Professional Rain Gauge onto a 40mm pole.
Adapter G1/4" in > G1/2" out
To install G1/4" threaded manometers in G1/2" threaded pressure collets.
Adapter G1/4" in > 18 NPT out
To install G1/4" threaded manometers in 18 NPT threaded pressure collets.
7pin cable 3m for ADCON SEN-R
3m connection cable for ADCON TR1 / RTU
CAN-Cable 4pin to connect A440 to A840 / A850
Connects A840/A850 Telemetry Gateway to A440 Wireless Modem.
Water meter cable: 7pin male - open ends: 5, 10, 15, 20m
Cables in various lengths to connect water meters to an ADCON RTU
7pin-7pin Extension Cords: 2m, 4m, 8m
A variety of extension cords for ADCON RTUs and sensors
5pin-5pin Extension Cord 10m
To mount solar panel or mains adapter in a distance from the RTU
Reinforced Poleset, 360cm w/o impact protection
Robust aluminum pole set for mounting of ADCON RTUs
SDI-12 cable 7-pin M9 - open end: 5m, 10m
Custom-made cables to connect SDI-12 sensors to ADCON RTUs
Cables for ADCON PA1 Manometer Probes: 5m, 10m
Cables for the Adcon PA-1 manometer sensor
A511 7-pin to 5-pin adapter cable
Connect your ADCON SDI-12 sensors to your A511 Sensor Testbox!
A908 Step-Up Converter
Step-Up Converter for sensor excitation: enhances RTU's battery voltage by a factor of 1.5
A514 Modbus Interface
Allows connection of Modbus devices
A922 Power Adapter
Power adapter for industrial applications with 12V or 24VDC supply
A553 Digital Port Extender
Each A553 adds 14 digital I/Os to a Series 4 RTU (A753, A723)
Heavy duty cross bar clamp, aluminum, for 40mm pole set
Heavy duty cross bar clamp, aluminum
A502 Signal converter 4-20mA -> 0-2.5V
Most ADCON RTU's require voltage input signals. Most industrial installations supply mA-signals. Therefore: A502!
Solar Set 540mA, 9VDC, 5.1W
Solar Set 540mA for all Adcon RTUs
Heavy duty dual cross bar clamp, aluminum, for 40mm pole set
Heavy duty dual cross bar clamp, aluminum
10m Aluminum Pole Set
Light-weight telescopic aluminum pole for professional weather stations
Foldable base, galvanized steel, for 10m pole set
Extremely sturdy foldable base to take down 10m mast
Solar Set 260mA, 9VDC, 2.4W
Solar Panel 260mA for A72x RTUs
115V AC US Power Supply for A72x, A73x, A75x
Versatile, reliable power supply for 115V AC with US Type A connector
230V AC UK Power Supply for A72x, A73x, A75x
Versatile, reliable power supply for 230V AC with UK Type G connector
240V AC Australian Power Supply for A72x, A73x, A75x
Versatile, reliable power supply for 240V AC with Australian Type I connector
100 - 240V Power Supply for A72x, A73x, A75x
Versatile, reliable power supply for 100-240V AC, various connectors available
ACS110 Charger for ADCON Battery Packs
The ADCON ACS-110 Charger is the ideal device to charge all ADCON NiMH and NiCd batteries with capacities of up to 7000 mAh.
Protection Cap for male Binder connectors
Keeps male Binder Connectors clear of dirt and moisture
Battery Pack NiMH 4500mAh for A850
Industry-grade NiMH battery, for environmental applications
A902 1/2/3 Adaptor Cable
7-pin 1/2/3 Adaptor to connect multiple analog sensors to one RTU port
Y-Cable 5 pin
5-pin Y-cable, for dual solar panel solutions
Antenna GSM Quadband incl. mounting bracket and 5m cable
Whenever you need to mount the antenna a few meters away from your GPRS RTU
Y-Cable 7-pin
7-pin Y-cable to connect 2 sensors to one I/O port
USB Communication Cable for A723, A731, A733, A75x
A720 USC USB communication cable to program RTU
A503 I/O-Tester for A723, A733, A753
The A503 provides fast and accurate diagnostics for all ports of your RTU - in the field and in the lab.
LED-Tool for ADCON RTU’s
LED Tool to check your RTUs connection and battery status
A910 Solar Panel Tester
All ADCON solar panels of A723, A733 and A75x RTU's can be tested quickly and reliably.
A511 Sensor Testbox
The tool of choice for your daily maintenance work: tests all your sensors and solar panels.