Our products
The following pages shows our Smart Wireless Telemetry products and sensor portfolio for meteorological, hydrographical and agro-meteorological purposes.
100 - 240V Power Supply for A72x, A73x, A75x
Versatile, reliable power supply for 100-240V AC, various connectors available
10m Aluminum Pole Set
Light-weight telescopic aluminum pole for professional weather stations
115V AC US Power Supply for A72x, A73x, A75x
Versatile, reliable power supply for 115V AC with US Type A connector
230V AC UK Power Supply for A72x, A73x, A75x
Versatile, reliable power supply for 230V AC with UK Type G connector
240V AC Australian Power Supply for A72x, A73x, A75x
Versatile, reliable power supply for 240V AC with Australian Type I connector
5pin-5pin Extension Cord 10m
To mount solar panel or mains adapter in a distance from the RTU
7pin cable 3m for ADCON SEN-R
3m connection cable for ADCON TR1 / RTU
7pin-7pin Extension Cords: 2m, 4m, 8m
A variety of extension cords for ADCON RTUs and sensors
A440 Wireless Modem
A440 Wireless Modem
Wireless Modem connected to an ADCON Telemetry Gateway.
- Wireless modem
- IP-67; 20km range and even beyond depending on installation
- Radio communication (430-470MHz), 500mW
A502 Signal converter 4-20mA -> 0-2.5V
Most ADCON RTU's require voltage input signals. Most industrial installations supply mA-signals. Therefore: A502!
A503 I/O-Tester for A723, A733, A753
The A503 provides fast and accurate diagnostics for all ports of your RTU - in the field and in the lab.
A511 7-pin to 5-pin adapter cable
Connect your ADCON SDI-12 sensors to your A511 Sensor Testbox!
A511 Sensor Testbox
The tool of choice for your daily maintenance work: tests all your sensors and solar panels.
A514 Modbus Interface
Allows connection of Modbus devices
A553 Digital Port Extender
Each A553 adds 14 digital I/Os to a Series 4 RTU (A753, A723)
A723 addIT Series 4
A723 addIT Series 4 radio modem
A compact 10mW RTU with integrated SDI-12 capability, lots of I/O ports, lots of memory, and more at a very attractive price.
- IP-67; Ultra low power design; Cost effective solution if a number of sites are close to each other; 1km radio range
- Radio communication (432-470MHz), 10mW
- 6 analog 0 … 1/2,5VDC (3 channels also support 0 … 150mV); 2 pulse counter (2x 30Hz counters); 2 digital I/O (expandable with A553 up to 14 digital I/O's), 40 SDI-12 values
A724 addSWITCH
A724 addSWITCH Series 4 Valve Controller
Turns latching solenoids on and off, reads meters, monitors pressure!
- Remote Transmission Unit
- IP-67; Ultra low power design; Wireless remote irrigation control for up to four latching solenoids; 1km radio range
- Radio communication (432-470MHz), 10mW
- 1 analog 0 … 1/2,5VDC; 4 pulse counter (4x 30Hz counters); 4 latching solenoids (voltage programmable 5,5 … 15VDC)
A751 addRELAY UHF Repeater Station
A751 addRELAY UHF Repeater Station
A751 extends the operating radius of other Adcon RTUs and economically optimizes radio quality. It is the successor to the successful A731 addRELAY.
- Remote Transmission Unit
- IP-67; Ultra low power design; Cost effective solution to extend range of other short or lange range UHF radio loggers by 20km and more depending on installation; Same major components as other data loggers
- Radio communication (430-470MHz), 500mW
A753 addWAVE GPRS RTU
A753 addWAVE GPRS RTU
A753 GPRS is an extremely flexible logger with lots of resolution, memory, I/O ports, WMO compliant measuring methods and much more.
- Compact data logger with integrated cell modem
- IP-67; ultra-low-power design; WMO compliant measurement methods; high analog resolution; large integrated memory (2MB = ~ 6 months of 15-minute data)
- GSM, GPRS; UMTS optional
- 12 x analog 0…1/2,5VDC (3 channels also support 0…150mV); 4 pulse counters (2x 500Hz fast counters / 2x 50Hz counters); 4 digital I/O's (expandable with A553 to up to 52 digital I/O's); 40 SDI-12 values; Modbus via adapter
A753 addWAVE UHF
A753 addWAVE UHF
The A753 addWAVE is the workhorse in ADCON's range of UHF RTU's, with a wealth of features and an unbeatable expansion capability.
- Compact data logger with integrated UHF modem
- IP-67 ultra-low-power design, WMO compliant measurement methods, high analog resolution, large integrated memory (2MB = ~6 months of data for 15-minute-readings), 5-20km transmission range, repeater functionality
- UHF radio (430-470MHz) with 500mW
- 12 x analog 0…1/2,5VDC (3 channels also support 0…150mV); 4 pulse counters (2x 500Hz fast counters / 2x 50Hz counters); 4 digital I/O's (expandable with A553 to up to 52 digital I/O's); 40 SDI-12 values; Modbus via adapter
A755 addSDI GPRS V2
A755 addSDI GPRS V2
Economically stores and transmits data from all environmental sensors with SDI-12 interface.
- Remote Transmission Unit
- IP-67 ;Ultra low power design ;Cost effective solution in case of using digital sensors (SDI-12 / Modbus), digital I/O's and counters ;Large integrated memory (2MB equals 6 months of data for usual 15 minute interval values)
- GPRS, 3G
- 2 pulse counter (2x 30Hz counters): 2 digital I/O (expandable with A553 up to 14 digital I/O's): 40 SDI-12 values: Modbus support via adapter
A850 Base Station 5
with A440 + 30m CAN cable
Complete base station to manage UHF, GSM, GPRS, UMTS stations
- Telemetry Gateway
- Embedded Linux operating system; Java web application with graphical user interface; Backup battery to survive up to 20 hours of power outage; 1GB memory which allows to store data of 200 RTU's for approx. 4 weeks; Manages a network of up to 1000 RTU's; Co
- Fully integrable into ethernet network
- 2x USB; 1x 100MBit Ethernet; 1x RS-232; 1x RS-485 (to A440 Wireless Modem)
A850 Telemetry Gateway
The Core
The core of your monitoring network - the A850 Telemetry Gateway. Manages large networks of UHF, GSM and GPRS RTUs automatically.
- Base Station for Adcon Wireless Sensor Networks
- Manages up to 1000 Adcon RTUs, easy to operate via graphical user interface, integrated uninterruptible power supply (max. 5h), 1GB data memory sufficient for 200 stations for 4 weeks, embedded Linux OS
- Connects seamlessly into Ethernet networks
- 2x USB; 1x 100MBit Ethernet; 1x RS-232; 1x RS-485 (to A440 Wireless Modem)
A902 1/2/3 Adaptor Cable
7-pin 1/2/3 Adaptor to connect multiple analog sensors to one RTU port
A908 Step-Up Converter
Step-Up Converter for sensor excitation: enhances RTU's battery voltage by a factor of 1.5
A910 Solar Panel Tester
All ADCON solar panels of A723, A733 and A75x RTU's can be tested quickly and reliably.
A917 Power-Booster
Power Booster for sensors with high inrush-current and ~9.6V power requirement
A922 Power Adapter
Power adapter for industrial applications with 12V or 24VDC supply
ACS110 Charger for ADCON Battery Packs
The ADCON ACS-110 Charger is the ideal device to charge all ADCON NiMH and NiCd batteries with capacities of up to 7000 mAh.
Adapter for Professional Rain Gauge
To mount the ADCON Professional Rain Gauge onto a 40mm pole.
Adapter G1/4" in > 18 NPT out
To install G1/4" threaded manometers in 18 NPT threaded pressure collets.
Adapter G1/4" in > G1/2" out
To install G1/4" threaded manometers in G1/2" threaded pressure collets.
ADCON addVANTAGE 6.x
ADCON addVANTAGE 6.x
What it is? A flexible platform to visualize, process and distribute data - for literally millions of users!
Adcon BP1 Barometric Pressure Sensor
500 - 1500mbar, 0.1-2.5V
Extremely accurate - yet extremely affordable. Swiss made precision in a wind gust proof case.
ADCON SERIES 6 RTU
ADCON new ultra low power RTU A760, A765 and A764
The ADCON SERIES 6 RTU is the new generation of remote-controlled, ultra low-power dataloggers for agricultural, meteorological and hydrological applications at a competitive price.
- Compact data logger with integrated cell modem
- ultra-low-power design; large integrated memory; IP-67/IP-65; WMO-compliant weather recording; Bluetooth; Firmware update over the air feature (FOTA )
- 2G/3G or 4G/LTE
- A764: 12x analog in (0 … 2,5 VDC); 4x pulse counter 4x digital in/out (0 … 3 V TTL); 40x SDI-12 values; Analog resolution: 16-Bit @ 0 … 2,5 V
Adcon TR1 Air Temperature & rel Humidity Sensor
Spare sensor for Adcon's Combi sensor model "Standard"
ADCON TR1 - highly accurate, versatile temperature and humidity sensor for an attractive price
Antenna 430-470 MHz TNC f. A440, A733
The standard antenna for all Adcon UHF RTUs with 500mW output power
Antenna 432-470 MHz for A723 Series 3/4, A724
Flexible antenna for addIT A723 Series 3/4 and A724
Antenna GSM Quad Band TNC, IP-66, rigid
Highly efficient rigid quad band antenna, tailor made for ADCON RTUs.
Antenna GSM Quadband incl. mounting bracket and 5m cable
Whenever you need to mount the antenna a few meters away from your GPRS RTU
Antenna TNC 430-470 MHz inc. mounting bracket and 6m cable
Mounting kit for UHF antenna with TNC connector, incl. cable and all accessories.
Battery Pack NiMH 3300mAh for A730MD/SD
Industry-Grade battery for environmental applications
Battery Pack NiMH 4500mAh for A850
Industry-grade NiMH battery, for environmental applications
Cables for ADCON PA1 Manometer Probes: 5m, 10m
Cables for the Adcon PA-1 manometer sensor
CAN-Cable 4pin to connect A440 to A840 / A850
Connects A840/A850 Telemetry Gateway to A440 Wireless Modem.
Directional GSM 900/1800/1900 TNC, IP66, Mast mount
To improve transmission and reception in areas with bad GSM signal
Directional GSM Antenna TriBand TNC, IP66, Mast mount
Provides extra signal strength for difficult locations
Fixture-Kit for guy wires: set of three lugs incl. nuts and bolts
Fixture Kit for guy wires
Foldable base, galvanized steel, for 10m pole set
Extremely sturdy foldable base to take down 10m mast
Guy wire set for 350cm pole set
Complete guy wire set to secure a standard weather station
Heavy duty cross bar clamp, aluminum, for 40mm pole set
Heavy duty cross bar clamp, aluminum
Heavy duty dual cross bar clamp, aluminum, for 40mm pole set
Heavy duty dual cross bar clamp, aluminum
LED-Tool for addIT, addWAVE
LED Tool to check your RTUs connection and battery status
Lightning rod for Wind sensor cross arm
Lightning rod for mounting bracket of Pro 10 Sensor set
OTT Pluvio² L - precipitation gauge
All-weather, high accuracy rain gauge for continuous data collection
The OTT Pluvio² is an all-weather precipitation gauge that uses superior weight-based technology to measure the amount and intensity of rain, snow, and hail.
OTT Pluvio² S - precipitation gauge
Compact universal weighing precipitation gauge
The OTT Pluvio² S weighing precipitation gauge measures the intensity and cumulative precipitation in a broad measuring range from 0 to 3,000 mm/h.
Pole Anchor: 76x800mm, galvanized steel, 4 adjustment screws
Screw that! You wont find any more adequate screw than this one!
Pole Pounder
Protects the top end of your poles
Protection Cap for male Binder connectors
Keeps male Binder Connectors clear of dirt and moisture
Pyranometer SP-Lite
incl. amplifier
SP-Lite - a low-cost, yet very accurate, universal silicium pyranometer.
RA440 - Remote A440
RA440 - Remote A440
For all those remote areas where you don't have GSM coverage, and where you can't put a Base Station near your UHF RTU's!
- Remote Wireless Modem
- IP-67; Build a remote UHF network, uplink to A850 via GPRS / 3G; 20km range on UHF and even beyond depending on installation
- Uplink to A850 via GPRS, 3G and Radio communication (430-470MHz), 500mW
Real Time Clock for A850
Guarantees automatic startup of A850 and continued operation after complete power failure.
Reinforced Poleset, 360cm w/o impact protection
Robust aluminum pole set for mounting of ADCON RTUs
RG Pro Rain Gauge
Professional Rain Gauge, 0.1 & 0.2mm, 200cm²
This range of Rain Gauges is unique: extremely robust, accurate, reliable, WMO approved - and yet very economical!
RG1 Rain Gauge, 200cm², 0.2mm
unheated
Brand new design, fully made of aluminum: accurate, robust, with a long service life
RG1 Rain Gauge, 400cm², 0.1mm
unheated Version
Rain Gauge fully made of aluminum: accurate, robust, with a long service life
SDI-12 cable 7-pin M9 - open end: 5m, 10m
Custom-made cables to connect SDI-12 sensors to ADCON RTUs
SDI-12 Wiring Box Alu w/ 4x cable gland + WAGO clamp
Solid wiring box for proper conection of drop cables
Solar Set 260mA, 9VDC, 2.4W
Solar Panel 260mA for A72x RTUs
Solar Set 540mA, 9VDC, 5.1W
Solar Set 540mA for all Adcon RTUs
ST2 Temperature Sensor for Soil, Water and Snow
Soiltemperature
The Adcon Soil Temperature Sensor is a robust instrument, built for extreme simplicity in installation and operation.
Steel Sinter Cap for ADCON TR1
Extra rugged protection for TR1 sensor elements
TNC Antenna jack f/f
To mount external antennas on mounting brackets or protective cases
TR1 Combisensor Temperature / rel. Humidity
Combi Sensor "Standard"
Extremely accurate and robust combi-sensor for air temperature and relative humidity
TR2 Combisensor Temperature/rel.Humidity SDI-12
Combi Sensor "Professional"
Unsurpassed accuracy for highly professional applications!
USB Communication Cable for A723, A731, A733, A75x
A720 USC USB communication cable to program RTU
Wall mounting kit for A73x and A75x
Complete mounting kit for the aluminum case of the A73x and A75x
Water meter cable: 7pin male - open ends: 5, 10, 15, 20m
Cables in various lengths to connect water meters to an ADCON RTU
WET Leaf Wetness Sensor
Robust and low-maintenance Leaf Wetness sensor
Wind Direction Pro10
A professional wind direction only sensor at a very attractive price!
Wind Sensor Set Pro10/2
Wind Speed, Wind Direction, Cross Bar
This professional instrument was developed to meet WMO requirements. Robust, accurate and yet very affordable.
Wind Sensor Set Vento1
Wind Speed, Wind Direction, Cross Bar
This professional instrument was particularly developed to provide a very cost effective, yet WMO compliant wind sensor.
Wind Speed Pro10
A professional wind speed only sensor at a very attractive price!
Y-Cable 5 pin
5-pin Y-cable, for dual solar panel solutions
Y-Cable 7-pin
7-pin Y-cable to connect 2 sensors to one I/O port