Adcon BP1 Barometric Pressure Sensor
500 - 1500mbar, 0.1-2.5V
are mathematically compensated for, up to 80°C. The sensor has a very low power consumption and produces an analogue output signal of 0,1 ... 2,5VDC
The piezoresitive sensor element is fully temperature compensated and performs with accuracy better than 0,1%FS across the whole range. According to WMO requirements the sensor itself is encapsulated in a robust polycarbonate housing, which will protect the sensor element from erroneous readings caused by wind gusts. A high-capacity Goretex vent makes sure that pressure inside the case equals outside pressure, and that water ingress is prevented.
The sensor box is mounted to the pole of a weather station by means of a mounting bracket and clamp supplied with the product. A shielded 2m cable with a 7-pin Binder jack connects the probe to any RTU of the A723, A733 and A75x product families.
Leaflet - BP1 Barometric Pressure
|Pressure range (FS)||500 ... 1500mbar|
|Sensing element:||piezoresistive pressure element|
|Operating temperature:||-40°C ... +100°C / -40°F ... +212°F|
|Compensated temperature range:||0°C ... +80°C / 32°F ... +176°F|
|Supply Voltage:||3.5V ... 12V DC|
|Output Signal:||0.1V ... 2.5V|
Sensor: Stainless Steel 316L (DIN 1.4435)
|Dimensions LxWxH:||150 x 80 x 75mm / 5.9 x 3.15 x 2.95 in.
including mounting bracket, goretex vent and gland nut
|Weight:||330 grams (sensor only) / 0.73 lb.|
|Cable & Connector:||7-pin Binder jack with 2m cable|